Stainless Steel 347 Pipe Fittings
347 Stainless Steel Pipe Fittings, Stainless Steel 347 90 degree Elbow, 347 Stainless Steel Buttweld Fittings, SS 347 Elbow at Best Price in India.
VM Energy Solutions INC is a recognised exporter and seller of SS 347 Pipe Fittings, which gives Durability, Corrosion resistance, and High tensile strength. Heat remedy of this Stainless Steel UNS S34700 Cross Pipe Fittings ought to be achieved at 1100 Degree C – 1150 Degree C (2010 Degree F – 2100 Degree F) observed by means of rapid cooling. While selecting a relevant procedure the fusion reduce edges may be transformed directly, especially, it is able to be welded with none similarly preparation. However, every of these techniques on this steel directs to connecting or coalescence of steel sections into the pipes. In addition to this, we're assisted by means of a crew of younger visionaries for this steel thanks to which we've emerge as the maximum credible organization within the aggressive marketplace.
- Stainless Steel 347 Pipe Fittings Standard Specification
- Stainless Steel 347 Buttweld Fittings International Standard
- Stainless Steel 347 Pipe Fittings Equivalent Grade
- Different Forms of 347 Stainless Steel Pipe Fittings
- Stainless Steel 347 Pipe Fittings Chemical Composition
- 347 Stainless Steel Pipe Fittings Mechanical Properties
- Stainless Steel 347 Buttweld Fittings Thickness Chart
- Stainless Steel 347 Pipe Fittings Tolerance Chart
- Largest Inventory Of Stainless Steel 347 Pipe Fittings
Stainless Steel WNR 1.4550 Equal Cross Pipe Fittings may be used as heat-resistant steel and may constantly perform at excessive temperature due to favourable excessive-temperature resistance. It gives top oxidation resistance in intermittent provider to 840 Degree C and in non-stop provider to 900 Degree C, despite the fact that now no longer commonly selected for this environment. It additionally reveals utilization in cryogenic applications with low magnetic permeability and sturdiness down to -450 Degree F (-268 Degree C). They are optimized to enhance corrosion resistance in nitric acid solutions, even after welding. It gives managed welding conditions, and prevention of deformations all through welding.
Stainless Steel 347 Pipe Elbow, Stainless Steel 347 Reducer, DIN 1.4550 45 Degree Elbow, ASTM A403 SS 347 Pipe Fittings, UNS S34700 Pipe Cap, ANSI B16.9 SS 347 Stub End, SS 347 Pipe Tee Supplier in Mumbai, India.
Our equipped control ensures aggressive price, top provider and top fine steel to our clients. Our agency has spent a few years within the provider of Steel Industries for this alloy and have become a consultant maintaining brilliant revel in within the domain. The welding of absolutely austenitic material like this product calls for precautions against hot cracking. Alloy 347 Reducing Cross Pipe Fittings is suggested working and heat remedy parameters for alloy of rolling as much as 1150 Degree C - 800 Degree C. While processing handiest equipment for this product like steel brushes, pneumatic choices and so forth are allowed, on the way to now no longer endanger the passivation.
We Keep Bulk Stock Of UNS S34700 Pipe Bend, 347 Stainless Steel Pipe Fittings at Our Stockyard, Check SS 347 Welded Fittings Dimension, Buy SS 347 Seamless Pipe Fittings at an Affordable Price In India.
Stainless Steel 347 Pipe Fittings Standard Specification
| Specifications | ASTM A403 / ASME SA403 |
|---|---|
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Size | Seamless Fittings: 1/2" - 10" Welded Fittings: 1/2" - 48" |
| Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Manufacturing Standards | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, DN15-DN1200 BS : BS4504, BS4504, BS1560, BS10 JIS : JIS B2311, JIS B2312, JIS B2313, JIS B2316 GOST : GOST 17375, GOST 17376, GOST 30753, GOST 17378, GOST 17379, GOST 17380 EN: EN10253-1, EN10253-2 |
| Types | Seamless / ERW / Welded / Fabricated |
| Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
| Elbow | Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D. Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
| Specialized manufacturer of | 90º Elbows, Couplings, Reducers, Inserts, Caps, Nipples, 45º Elbows, Tees, Crosses, Equal Tees & Reducing Tees |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Stainless Steel 347 Buttweld Fittings International Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-403 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Stainless Steel 347 Pipe Fittings Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN |
| SS 347 | 1.4550 | S34700 | SUS 347 | 08Ch18N12B | X6CrNiNb18-10 |
Different Forms of 347 Stainless Steel Pipe Fittings
SS 347 Elbow
SS 347 Stub End
SS 347 Cross
SS 347 Pipe Cap
SS 347 Tee
SS 347 Pipe Bend
SS 347 Pipe Nipple
SS 347 Concentric Reducer
SS 347 Eccentric Reducer
Stainless Steel 347 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
| SS 347 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 - 20.00 | 10xC – 1.10 | 9.00 - 13.00 | 62.74 min |
347 Stainless Steel Pipe Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Bulk Stock of 347 Stainless Steel Pipe Fittings, Rate of ASTM A403 F347 Pipe Cap in India, Check online 347 Stainless Steel Elbow Pressure Ratings, Largest DIN 1.4550 Reducer Stockist in India, We offer Stainless Steel 347 Stub End in almost all Sizes.
Stainless Steel 347 Buttweld Fittings Thickness Chart
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | |
| 8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
| 10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
| 15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
| 20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
| 25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
| 32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
| 40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
| 50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
| 65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
| 80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
| 90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
| 100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
| 150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
| 200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
| 250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
| 300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
| 40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
| 50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
| 50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
| 80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
| 100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
| 100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
| 150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
| 150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
| 200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
| 200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Stainless Steel 347 Pipe Fittings Tolerance Chart
| Nominal Diameter | O.D.For Bevel End | I.D.For End | Wall Thickness | Elbow | Tee | Reducer | Cap | 180°Elbow | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DN | NPS | A | B | C | M | H | E | O | K | Roughness | |||
| 15-65 | 1/2-2 1/2 | +1.6/-0.8 | 0.8 | -12.50% | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 3.2 | 6.4 | 6.4 | 0.8 |
| 80-100 | 3-4 | 1.6 | 1.6 | 6.4 | |||||||||
| 125-200 | 5-8 | +2.4/-1.6 | |||||||||||
| 250-450 | 10-18 | +4/-3.2 | 3.2 | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 | 9.6 | ||||
| 500-600 | 20-24 | +6.4/-4.8 | 4.8 | 3.2 | 3.2 | 3.2 | 3.2 | 4.8 | 9.6 | ||||
| 650-750 | 26-30 | ||||||||||||
| 4.8 | 4.8 | 4.8 | 4.8 | ||||||||||
| 800-1200 | 32-48 | ||||||||||||
| 1250-1500 | 50-60 | +9.6/-6.4 | 6.4 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | |||||
| 1550-1750 | 62-70 | +12.7/-9.6 | 9.6 | 12.7 | 12.7 | ||||||||
| 1800-2000 | 72-80 | +16/-12 | 12 | 16 | 16 | ||||||||
Largest Inventory Of Stainless Steel 347 Pipe Fittings
- Stainless Steel 347 End Cap
- SS 347 Reducer
- Stainless Steel 347 Lap Joint Stub End
- 347 Stainless Steel 180° LR Return Bends
- Stainless Steel 347 Pipe Fittings
- 347 Stainless Steel Butt weld Elbow
- Stainless Steel 347 SR Elbow
- 347 Stainless Steel Elbow
- Stainless Steel 347 Equal Cross
- 347 PN 16 Stainless Steel Pipe Nipple
- Stainless Steel 347 Pipe Bend
- ASTM A403 SS 347 Reducing Nipple
- Stainless Steel 347 45 Deg Elbow
- SS 347 Welded Fittings
- Stainless Steel 347 Reducing Cross
- SS 347 Pipe Elbow
- ASME B16.9 SS 347 Buttweld Fittings
- Stainless Steel 347 Two Halve Butt weld Fittings
- UNS S34700 90° Short Radius Elbow
- 347 Stainless Steel LR Elbows
- ASTM A403 F347 Buttweld Fittings
- SS 347 Long Stub End
- ANSI B16.9 Stainless Steel 347 Pipe Fittings
- SS 347 BS 4504 Piggable Bend
- ASME SA403 F347 Long Radius Bend
- 347 Stainless Steel 90° Short Radius Elbow
- WERKSTOFF NR. 1.4550 Barrel Nipple
- 347 Stainless Steel Butt weld Fittings
- SS 347 Stub End
- Stainless Steel 347 Industrial Pipe Fittings
- 347 Stainless Steel Butt weld Tee
- 347 Stainless Steel 1D Elbow/3D Elbow/5D Elbow
- ANSI B16.9 Stainless Steel 347 Mandrel Bend
- SS 347 Two Joint Pipe Fittings
- 347 Stainless Steel Lateral Tee
- SS 347 Long Stub End
- ASME SA403 F347 SS Eccentric Reducer
- SS 347 Butt weld Nipple
ASTM A403 SS 347 Pipe Fittings Application
