Stainless Steel 904L Pipe Fittings
904L Stainless Steel Buttweld Fittings, 904L Stainless Steel Pipe Fittings, Stainless Steel 904L 90 degree Elbow, SS 904L Elbow at Best Price in India.
VM Energy Solutions INC is a recognised supplier and manufacturer of SS 904L Pipe Fittings, which gives brilliant resistance that will increase with molybdenum alloy content. Meanwhile, we offer these Stainless Steel UNS N08904 Lap Joint Stub End Pipe Fittings in extraordinary sizes, grades and thickness as in step with custom-made demands furnished through our clients at a totally affordable price. They are time and again once more utilized by approach in their maximum noteworthy advantage, which may be used for sudden situations and in remarkably unpredictable areas wherein welding is insecure. The extraordinary fine finish of this alloy additionally consists of its excessive give up reliability and durability. We adhere to all of the norms on the way to create patron centric products like this steel which can be supposed to carry out to the utmost.
- Stainless Steel 904L Pipe Fittings Standard Specification
- Stainless Steel 904L Buttweld Fittings International Standard
- Stainless Steel 904L Pipe Fittings Equivalent Grade
- Different Forms of 904L Stainless Steel Pipe Fittings
- Stainless Steel 904L Pipe Fittings Chemical Composition
- 904L Stainless Steel Pipe Fittings Mechanical Properties
- Stainless Steel 904L Buttweld Fittings Thickness Chart
- Stainless Steel 904L Pipe Fittings Tolerance Chart
- Largest Inventory Of Stainless Steel 904L Pipe Fittings
Stainless Steel WNR 1.4539 Long Stubend Pipe Fittings is non-magnetic within the annealed circumstance however might also additionally end up barely magnetic after welding. Increased tiers of chromium, nickel and molybdenum as compared to this steel enhance resistance to chloride pitting and standard corrosion. It may be cold rolled to obtain the temper properties required through particular clients and / or production requirements. It is utilized in Outlet and inlet ductwork, Pipes, Piping structures, Pressure vessels, and so on. Chemical manner enterprise to contain hot focused acids, ammonia, and sulphur dioxide and within the food processing enterprise, they're used in touch with hot acetic and citric acid.
DIN 1.4539 45 Degree Elbow, SS 904L Pipe Tee, Stainless Steel 904L Pipe Elbow, Stainless Steel 904L Reducer, UNS N08904 Pipe Cap, ANSI B16.9 SS 904L Stub End, ASTM A403 SS 904L Pipe Fittings Supplier in Mumbai, India.
Alloy 904L Short Stubend Pipe Fittings is brilliant for hardness through responding to heat remedy and grades with excessive corrosion characteristics through including extra factors to provide it the traits desired. One regarded exception of this steel is surprisingly oxidizing acids including nitric acid to which the molybdenum-bearing steels are much less resistant. It is usually located within the fabric enterprise, wherein its strength and corrosion resistance may be applied. It is usually used to address sulphur, pulp liquor, acid dyestuffs, acetylating and nitrating mixtures, bleaching solutions, intense coal and oil, and plenty of chemical compounds. To optimize corrosion resistance on this alloy, a post-working annealing is suggested.
We Keep Bulk Stock Of UNS N08904 Pipe Bend, 904L Stainless Steel Pipe Fittings at Our Stockyard, Check SS 904L Welded Fittings Dimension, Buy SS 904L Seamless Pipe Fittings at an Affordable Price In India.
Stainless Steel 904L Pipe Fittings Standard Specification
| Specifications | ASTM A403 / ASME SA403 |
|---|---|
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Size | Seamless Fittings: 1/2" - 10" Welded Fittings: 1/2" - 48" |
| Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Manufacturing Standards | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, DN15-DN1200 BS : BS4504, BS4504, BS1560, BS10 JIS : JIS B2311, JIS B2312, JIS B2313, JIS B2316 GOST : GOST 17375, GOST 17376, GOST 30753, GOST 17378, GOST 17379, GOST 17380 EN: EN10253-1, EN10253-2 |
| Types | Seamless / ERW / Welded / Fabricated |
| Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
| Elbow | Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D. Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
| Specialized manufacturer of | 90º Elbows, Couplings, Reducers, Inserts, Caps, Nipples, 45º Elbows, Tees, Crosses, Equal Tees & Reducing Tees |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Stainless Steel 904L Buttweld Fittings International Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-403 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Stainless Steel 904L Pipe Fittings Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | KS | AFNOR | EN |
| SS 904L | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5L | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
Different Forms of 904L Stainless Steel Pipe Fittings
SS 904L Elbow
SS 904L Stub End
SS 904L Cross
SS 904L Pipe Cap
SS 904L Tee
SS 904L Pipe Bend
SS 904L Pipe Nipple
SS 904L Concentric Reducer
SS 904L Eccentric Reducer
Stainless Steel 904L Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Cu |
| SS 904L | 0.020 max | 2.00 max | 1.00 max | 0.040 max | 0.030 max | 19.00 – 23.00 | 4.00 – 5.00 max | 23.00 – 28.00 | 1.00 – 2.00 |
904L Stainless Steel Pipe Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.95 g/cm3 | 1350 °C (2460 °F) | Psi – 71000 , MPa – 490 | Psi – 32000 , MPa – 220 | 35 % |
Bulk Stock of 904L Stainless Steel Pipe Fittings, Rate of ASTM A403 F904L Pipe Cap in India, Check online 904L Stainless Steel Elbow Pressure Ratings, Largest DIN 1.4539 Reducer Stockist in India, We offer Stainless Steel 904L Stub End in almost all Sizes.
Stainless Steel 904L Buttweld Fittings Thickness Chart
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | |
| 8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
| 10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
| 15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
| 20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
| 25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
| 32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
| 40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
| 50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
| 65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
| 80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
| 90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
| 100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
| 150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
| 200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
| 250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
| 300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
| 40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
| 50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
| 50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
| 80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
| 100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
| 100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
| 150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
| 150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
| 200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
| 200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Stainless Steel 904L Pipe Fittings Tolerance Chart
| Nominal Diameter | O.D.For Bevel End | I.D.For End | Wall Thickness | Elbow | Tee | Reducer | Cap | 180°Elbow | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DN | NPS | A | B | C | M | H | E | O | K | Roughness | |||
| 15-65 | 1/2-2 1/2 | +1.6/-0.8 | 0.8 | -12.50% | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 3.2 | 6.4 | 6.4 | 0.8 |
| 80-100 | 3-4 | 1.6 | 1.6 | 6.4 | |||||||||
| 125-200 | 5-8 | +2.4/-1.6 | |||||||||||
| 250-450 | 10-18 | +4/-3.2 | 3.2 | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 | 9.6 | ||||
| 500-600 | 20-24 | +6.4/-4.8 | 4.8 | 3.2 | 3.2 | 3.2 | 3.2 | 4.8 | 9.6 | ||||
| 650-750 | 26-30 | ||||||||||||
| 4.8 | 4.8 | 4.8 | 4.8 | ||||||||||
| 800-1200 | 32-48 | ||||||||||||
| 1250-1500 | 50-60 | +9.6/-6.4 | 6.4 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | |||||
| 1550-1750 | 62-70 | +12.7/-9.6 | 9.6 | 12.7 | 12.7 | ||||||||
| 1800-2000 | 72-80 | +16/-12 | 12 | 16 | 16 | ||||||||
Largest Inventory Of Stainless Steel 904L Pipe Fittings
- SS 904L Reducer
- Stainless Steel 904L Pipe Fittings
- 904L Stainless Steel 180° LR Return Bends
- Stainless Steel 904L SR Elbow
- SS 904L Pipe Elbow
- Stainless Steel 904L Equal Cross
- ASME B16.9 SS 904L Buttweld Fittings
- Stainless Steel 904L 45 Deg Elbow
- ASTM A403 SS 904L Reducing Nipple
- Stainless Steel 904L Two Halve Butt weld Fittings
- 904L PN 16 Stainless Steel Pipe Nipple
- Stainless Steel 904L Reducing Cross
- SS 904L Welded Fittings
- UNS N08904 90° Short Radius Elbow
- Stainless Steel 904L Pipe Bend
- 904L Stainless Steel Butt weld Elbow
- Stainless Steel 904L End Cap
- 904L Stainless Steel Elbow
- Stainless Steel 904L Lap Joint Stub End
- SS 904L Two Joint Pipe Fittings
- Stainless Steel 904L Industrial Pipe Fittings
- 904L Stainless Steel Butt weld Fittings
- ANSI B16.9 Stainless Steel 904L Pipe Fittings
- 904L Stainless Steel 1D Elbow/3D Elbow/5D Elbow
- ASME SA403 F904L Long Radius Bend
- 904L Stainless Steel LR Elbows
- SS 904L Long Stub End
- 904L Stainless Steel Lateral Tee
- SS 904L Long Stub End
- ANSI B16.9 Stainless Steel 904L Mandrel Bend
- 904L Stainless Steel 90° Short Radius Elbow
- ASTM A403 F904L Buttweld Fittings
- 904L Stainless Steel Butt weld Tee
- SS 904L BS 4504 Piggable Bend
- WERKSTOFF NR. 1.4539 Barrel Nipple
- SS 904L Stub End
- ASME SA403 F904L SS Eccentric Reducer
- SS 904L Butt weld Nipple
ASTM A403 SS 904L Pipe Fittings Application
