Alloy 20 Socket Weld Fittings
Alloy 20 Socket Weld Pipe Nipple, Carpenter 20 High Pressure Socket Weld Fittings, Incoloy® Alloy 20 Socket Weld Plug, Alloy 20 Socket Weld Fittings at Best Price in India.
where the alloying elements tend to form either solid solutions or compounds or carbides. Alloying elements in our Alloy 20 Socket Weld Elbow Fittings as well have an effect on the eutectoid temperature of the steel. Manganese and nickel in these Alloy 20 Forged Socket Weld Tee Fittings lower the eutectoid temperature and are known as austenite stabilizing elements. Alloy 20 Socket weld Fitting is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to butt-weld fittings, Socket Weld Fittings are mainly used for small Pipe Diameters (Small Bore Piping); Generally for Piping whose Nominal Diameter is NPS 2 or smaller.
- Alloy 20 Socket Weld Fittings Standard Specification
- Alloy 20 Socket Weld Fittings Standard
- Alloy 20 Socket Weld Fittings International Standards
- Different Forms of Alloy 20 Socket Weld Fittings
- Alloy 20 Socket Weld Fittings Chemical Composition
- Alloy 20 Socket Weld Fittings Mechanical Properties
- Size Chart Of Alloy 20 Socket Weld Fittings
- Weight Chart Of Alloy 20 Socket Weld Fittings
- Largest Inventory Of Alloy 20 Socket Weld Fittings
- Manufacturing Standard / Pressure Rating of Alloy 20 Socket Weld Fittings
A Socket Weld Threaded Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. Socket Weld fittings are mainly used for small pipe diameters. To join pipe to Valves and fittings or to other sections of pipe, fillet-type seal welds be used. Manganese and nickel in these Alloy 20 Socket Weld Tee Fittings lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements, the austenitic structure of our Alloy 20 Socket Weld Cross Fittings may be obtained at room temperature.
UNS N08020 Socket Weld Half Coupling, DIN 2.4660 Socket Weld Pipe Cap, ASTM A182 Incoloy® Alloy 20 Socket Weld Union, Alloy 20 Socket Weld Fittings, Alloy 20 Socket Weld 180 deg. Elbow, ANSI B16.5 Alloy 20cb3 Socket Weld 90 deg, Carpenter 20 Socket Weld Cross Supplier in Mumbai, India.
We are manufacturers and suppliers of ASTM B462 Alloy 20 Socket Weld Fittings that exude an unsurpassed level of resistance to stress corrosion cracking and to alkaline solutions as well that may prove a boon to your chemical and nuclear industry. Alloy 20 Socket Weld Pipe Fittings find its uses in exotic and highly-demanding applications, such as in the turbine blades of jet engines, in spacecraft, and in nuclear reactors. UNS N08020 Socket Fittings is non-hardening in nature which helps it to prevent cracking when the alloy is exposed to high temperature or welded.
We Keep Bulk Stock Of UNS N08020 WNRF High Pressure Socket Weld Fittings, Incoloy® Alloy 20 Socket Weld Fittings at Our Stockyard, Check Carpenter 20 Socket Weld Pipe Nipple Dimension, Buy Alloy 20 Socket Weld Full Coupling at an Affordable Price In India.
Alloy 20 Socket Weld Fittings Standard Specification
| Specifications | ASTM A182 / ASME B462 |
|---|---|
| Size | 1/8" NB to 4" NB in |
| Threaded Fittings Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Pressure Rating | 2000lb/ 3000lb/ 6000lbs |
| Thread | NPT, BSPT, BSPP |
| Manufacturing Standards | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 BS : BS3799 EN: EN10253-1, EN10253-2 |
| Connection | Welding |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
| Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Crosses, Couplings, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows – Female-Female, Male-Female, Male-Male, Union, Nipples, Couplings, Plugs Fittings |
| Socket Weld Forged Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Socket Weld Fittings uses & application | Fittings To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc |
| Material Test Certificates (MTC) for Alloy 20 Socket Weld Fittings as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Alloy 20 Socket Weld Fittings Standard
| ASTM A182 – ASME B462 Forged Fittings | Standard Specification for Wrought Austenitic SS Piping Fitting |
| ASME B16.9 Forged Fittings | Factory-Made Wrought BW Fittings |
| ASME B16.11 Forged Fittings | Forged Steel Fittings, SW – Welding and NPT |
| MSS SP-43 | Wrought and Fabricated BW Fittings for Hight And Low Pressure |
| BS3799 | Specification for Steel fittings, screwed and SW for the Oil And Gas Industry |
Alloy 20 Socket Weld Fittings International Standards
| STANDARD | WERKSTOFF NR. | UNS |
| Alloy 20 Gr. 5 | 2.4660 | N08020 |
Different Forms of Alloy 20 Socket Weld Fittings
Alloy 20 Socketweld Union
Alloy 20 Socketweld Tee
Alloy 20 Socketweld Plug
Alloy 20 Socketweld Full Coupling
Alloy 20 Socketweld Elbow
Alloy 20 Socketweld Cross
Alloy 20 Socketweld Coupling
Alloy 20 Socketweld Cap
Alloy 20 Socket Weld Tee
Alloy 20 Socket Weld Fittings Chemical Composition
| Grade | Ti | C | Fe | H | N | O | Al | V |
| Ti Grade5 | 90 min | – | 0.25 max | – | – | 0.2 max | 6 min | 4 min |
Alloy 20 Socket Weld Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Alloy 20 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
Bulk Stock of Incoloy® Alloy 20 Socket Weld Fittings, Rate of ASTM A182 Alloy 20 Socket Weld 180 deg in India, Check online Carpanter Alloy 20 Socket Weld Plug Pressure Ratings, Largest DIN 2.4660 High Pressure Socket Weld Fittings Stockist in India, We offer Alloy 20 Socket Weld Pipe Nipple in almost all Sizes.
Size Chart Of Alloy 20 Socket Weld Fittings
| Description | Class Designation | ||
|---|---|---|---|
| 3000LB | 6000LB | 9000LB | |
| Elbows 45 deg and 90 deg, Tee, Crosse, Coupling, Half-Coupling, End or Pipe Cap |
½ - 4 | ½ - 2 | ½ - 2 |
| ½ - 4 | ½ - 2 | ½ - 2 | |
| ½ - 4 | ½ - 2 | ½ - 2 | |
Weight Chart Of Alloy 20 Socket Weld Fittings
| Normal Size Of Pipe | Type A | Type B | QTY | Weight Chart |
|---|---|---|---|---|
| ¼ | 0.81 | 0.88 | 160 | 0.20 |
| ⁄ | 0.97 | 1.00 | 130 | 0.26 |
| ½ | 1.12 | 1.31 | 100 | 0.57 |
| ¾ | 1.31 | 1.5 | 75 | 0.71 |
| 1 | 1.5 | 1.81 | 40 | 1.08 |
| 1 ¼ | 1.75 | 2.19 | 25 | 1.68 |
| 1 ½ | 2.00 | 2.44 | 18 | 2.38 |
| 2 | 2.38 | 2.97 | 10 | 3.55 |
| 2 ½ | 3.00 | 3.62 | 4 | 6.22 |
| 3 | 3.38 | 4.31 | 2 | 10.36 |
| 4 | 4.19 | 5.75 | 1 | 23.91 |
Largest Inventory Of Alloy 20 Socket Weld Fittings
- UNS N08020 Socket Weld 45 deg. Elbow
- Incoloy® Alloy 20 Socket Weld Fittings
- ASME B16.5 Carpenter 20 High Pressure Socket weld Fittings
- Alloy 20 Socket Weld Fittings
- DIN 2.4660 Socket Weld Fittings
- UNS N08020 Socket Weld Plug
- ASTM A182 Carpenter 20 Socket Weld Full Coupling
- Alloy 20 Socket Weld Pipe Elbow
- UNS N08020 High Pressure Socket Weld Fittings
- Carpenter 20 Socket Weld End Pipe Cap
- DIN 2.4660 Socket Weld Fittings
- Alloy 20 PN 10 Socket Weld Cross
- 3000 lbs ansi b16.11 socket Weld female thread coupling
- DIN 2.4660 Half Coupling
- UNS N08020 Socket Weld Equal Tee
- ANSI B16.5 Alloy 20 Socket Weld Fittings
- Alloy 20 Socket Weld Fittings
- DIN 2.4660 Socket weld Plug
- ANSI B16.5 Alloy 20 Socket Weld Fittings
- Carpenter 20 180 deg. Socket Weld Elbow
- ASME B462 Alloy 20 Socket Weld Tee
- Alloy 20 Socket weld Unequal Tee
- Carpenter 20 150# Union
- WERKSTOFF NR. 2.4660 Socket weld Fittings
- 9000LB B16.11 Alloy 20 Socket Weld Fittings
- Incoloy® Alloy 20 Forged Socket weld Elbow
- ASME B16.11 2000# Alloy 20 Half Coupling
- UNS N08020 Socket Weld Pipe Nipple
- ASTM A182 Alloy 20 WNRF Socket Weld Pipe Nipple
- ASME B462 Alloy 20 Socket Weld Fittings
- DIN 2.4660 Groove & Tongue Flange
- Carpenter 20 Socket weld Pipe Elbow
- UNS N08020 Socket Weld Forged Elbow
Manufacturing Standard / Pressure Rating of Alloy 20 Pipe Socket Weld Fittings
| Pressure-Temperature for ASME B16.11 Threaded Fittings (psig) | |||||
|---|---|---|---|---|---|
| Temperature | Class | ||||
| Class 150 | Class 300 | ||||
| 1/4 - 1 inch | 1 1/4 - 2 inch | 2 1/2 - 3 inch | |||
| (oF) | (oC) | ||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
| 200 | 93 | 265 | 1785 | 1350 | 910 |
| 250 | 121 | 225 | 1575 | 1200 | 825 |
| 300 | 149 | 185 | 1360 | 1050 | 735 |
| 350 | 177 | 150 | 1150 | 900 | 650 |
| 400 | 204 | - | 935 | 750 | 560 |
| 450 | 232 | - | 725 | 600 | 475 |
| 500 | 260 | - | 510 | 450 | 385 |
| 550 | 288 | - | 300 | 300 | 300 |
ASTM A182 Alloy 20 Socket Weld Fittings Application
