Monel 400 Pipe Fittings
Monel Alloy 400 Elbow, Monel 400 90 degree Elbow, Monel 400 Buttweld Fittings, Nickel Alloy 400 Pipe Fittings at Best Price in India.
VM Energy Solutions INC is a recognised stockist and trader of Monel Alloy 400 Pipe Fittings, which are the maximum flexible with the maximum prolonged use ones. Monel WNR 2.4361 Pipe End Cap Butt Weld Fittings exhibit suitable properties concerning corrosion resistance, forming and weldability. It is utilized in Engineering enterprise, Energy conversion plant life, Cement enterprise, and greater. It is a cost-effective and sensible desire for maximum environments; however it doesn’t have the chloride resistance. It is likewise very ductile, and has suitable weldability permitting its significant utilization in many applications. It may be drawn into wire, formed into components (bending) and cold headed with none difficulty. It gives chromium-nickel steels while uncovered to many varieties of chemical corrodents inclusive of sea water, brine solutions, and the like.
- Monel 400 Pipe Fittings Standard Specification
- Monel 400 Buttweld Fittings International Standard
- Monel 400 Pipe Fittings Equivalent Grade
- Different Forms of Monel Alloy 400 Pipe Fittings
- Monel 400 Pipe Fittings Chemical Composition
- Monel Alloy 400 Pipe Fittings Mechanical Properties
- Monel 400 Buttweld Fittings Thickness Chart
- Monel 400 Pipe Fittings Tolerance Chart
- Largest Inventory Of Monel 400 Pipe Fittings
Maximum feeds and gradual speeds on this Monel UNS N04400 Swage Nipple Pipe Fittings will supply first-class machinability. They have the equal primary iron and carbon composition. It is simply brake or roll formed into quite a few components for applications within the commercial, architectural, and transportation fields. Another not unusual feature of this steel is they have a tendency to be non-magnetic — even though they'll emerge as magnetic after cold working. It exhibit suitable properties concerning corrosion resistance, forming and weldability. It is utility steel immune to moist abrasion and moderate corrosion – weld stabilized.
Monel® Alloy 400 Reducer, Monel 400 Pipe Elbow, ANSI B16.9 Nickel Alloy 400 Stub End, UNS N04400 Pipe Cap, ASTM B366 Monel Alloy 400 Pipe Fittings, Alloy 400 Pipe Tee, DIN 2.4360 45 Degree Elbow Supplier in Mumbai, India.
Nickel Alloy 400 Pipe Nipples Butt Weld Fittings incorporates a healthful dose of chromium that offers its well-known corrosion resistance. Using this alloy on an outside enclosure so as to be uncovered to the factors (like on an oil rig, for example) now no longer simplest will increase the existence span of the enclosure however it's far lots more secure to be around. It is martensitic steel with better corrosion resistance and weldability. If the material on this product is broken both robotically or chemically, the film heals itself (offering that oxygen is present). Chloride ions on this steel can purpose localized corrosive attack (pitting and crevice corrosion) of susceptible steels. Containing chromium, they had been used for plenty commercial, architectural, chemical, and consumer applications.
We Keep Bulk Stock Of UNS N04400 Pipe Bend, Monel 400 Pipe Fittings at Our Stockyard, Check Monel Alloy 400 Welded Fittings Dimension, Buy Alloy 400 Seamless Pipe Fittings at an Affordable Price In India.
Monel 400 Pipe Fittings Standard Specification
| Specifications | ASTM B366 / ASME SB366 |
|---|---|
| Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Size | Seamless Fittings: 1/2" - 10" Welded Fittings: 1/2" - 48" |
| Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
| Manufacturing Standards | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, DN15-DN1200 BS : BS4504, BS4504, BS1560, BS10 JIS : JIS B2311, JIS B2312, JIS B2313, JIS B2316 GOST : GOST 17375, GOST 17376, GOST 30753, GOST 17378, GOST 17379, GOST 17380 EN: EN10253-1, EN10253-2 |
| Types | Seamless / ERW / Welded / Fabricated |
| Connection | Welding |
| Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
| Elbow | Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D. Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
| Specialized manufacturer of | 90º Elbows, Couplings, Reducers, Inserts, Caps, Nipples, 45º Elbows, Tees, Crosses, Equal Tees & Reducing Tees |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Monel 400 Buttweld Fittings International Standard
| Standard Code | Standard Name |
|---|---|
| American Steel Pipe Fittings Standard | |
| ANSI ASME SA-403 | Forged Durimet pipe fittings |
| ANSI ASME B16.9 | Factory-Made wrought steel pipe fittings |
| ANSI ASME B16.28 | Wrought steel butt-welding short radius elbows and returns |
| ISO 5251 | Stainless steel butt-welding fittings |
| MSS SP-43 | Wrought stainless steel butt-welding fittings |
| MSS SP-75 | Forging butt-welding fittings |
| German Steel Pipe Fittings Standard | |
| DIN 2605 | Steel butt-welding pipe fittings.elbows and bends |
| DIN 2615 | Steel butt-welding pipe fittings.tees |
| DIN 2616 | Steel butt-welding pipe fittings.reducers |
| DIN 2617 | Steel butt-welding pipe fittings.caps |
| Japanese Steel Pipe Fittings Standard | |
| JIS B2311 | Universal steel butt-welding pipe fittings |
| JIS B2312 | Steel butt-welding pipe fittings |
| JIS B2313 | Steel plate butt-welding pipe fittings |
| Other Steel Pipe Fittings Standard | |
| EN 1025 | 3 Butt-welding pipe fittings |
Monel 400 Pipe Fittings Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Different Forms of Monel 400 Pipe Fittings
Monel 400 Elbow
Monel 400 Stub End
Monel 400 Cross
Monel 400 Pipe Cap
Monel 400 Tee
Monel 400 Pipe Bend
Monel 400 Pipe Nipple
Monel 400 Concentric Reducer
Monel 400 Eccentric Reducer
Monel 400 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Monel Alloy 400 Pipe Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Bulk Stock of Monel® Alloy 400 Pipe Fittings, Rate of ASTM B366 Monel 400 Pipe Cap in India, Check online Alloy 400 Elbow Pressure Ratings, Largest DIN 2.4360 Reducer Stockist in India, We offer Monel 400 Stub End in almost all Sizes.
Monel 400 Buttweld Fittings Thickness Chart
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | 90° Elbow | 45° Elbow | Equal tee | |
| 8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
| 10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
| 15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
| 20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
| 25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
| 32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
| 40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
| 50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
| 65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
| 80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
| 90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
| 100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
| 150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
| 200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
| 250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
| 300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
| Product range and theoretical weights (kg) | |||||||||
| DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
| Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
| 40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
| 50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
| 50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
| 80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
| 100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
| 100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
| 150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
| 150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
| 200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
| 200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Monel 400 Pipe Fittings Tolerance Chart
| Nominal Diameter | O.D.For Bevel End | I.D.For End | Wall Thickness | Elbow | Tee | Reducer | Cap | 180°Elbow | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DN | NPS | A | B | C | M | H | E | O | K | Roughness | |||
| 15-65 | 1/2-2 1/2 | +1.6/-0.8 | 0.8 | -12.50% | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 3.2 | 6.4 | 6.4 | 0.8 |
| 80-100 | 3-4 | 1.6 | 1.6 | 6.4 | |||||||||
| 125-200 | 5-8 | +2.4/-1.6 | |||||||||||
| 250-450 | 10-18 | +4/-3.2 | 3.2 | 2.4 | 2.4 | 2.4 | 2.4 | 2.4 | 9.6 | ||||
| 500-600 | 20-24 | +6.4/-4.8 | 4.8 | 3.2 | 3.2 | 3.2 | 3.2 | 4.8 | 9.6 | ||||
| 650-750 | 26-30 | ||||||||||||
| 4.8 | 4.8 | 4.8 | 4.8 | ||||||||||
| 800-1200 | 32-48 | ||||||||||||
| 1250-1500 | 50-60 | +9.6/-6.4 | 6.4 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | |||||
| 1550-1750 | 62-70 | +12.7/-9.6 | 9.6 | 12.7 | 12.7 | ||||||||
| 1800-2000 | 72-80 | +16/-12 | 12 | 16 | 16 | ||||||||
Largest Inventory Of Monel 400 Pipe Fittings
- Monel 400 Reducer
- Monel® Alloy 400 Pipe Bend
- Monel 400 Two Halve Butt weld Fittings
- 400 PN 16 Monel Pipe Nipple
- Alloy 400 Elbow
- ASTM B366 Monel Alloy 400 Reducing Nipple
- Monel 400 End Cap
- Monel® Alloy 400 180° LR Return Bends
- ASME B16.5 Nickel Alloy 400 Buttweld Fittings
- Monel Alloy 400 Welded Fittings
- Monel 400 45 Deg Elbow
- UNS N04400 90° Short Radius Elbow
- Monel Alloy 400 Pipe Elbow
- Monel 400 Pipe Fittings
- Monel® Alloy 400 Lap Joint Stub End
- Alloy 400 Butt weld Elbow
- Monel 400 Reducing Cross
- Nickel Alloy 400 Equal Cross
- Monel 400 SR Elbow
- Monel® Alloy 400 90° Short Radius Elbow
- ANSI B16.5 Monel 400 Mandrel Bend
- Monel 400 BS 4504 Piggable Bend
- ASME SB366 Nickel Alloy 400 Eccentric Reducer
- Alloy 400 Lateral Tee
- Monel 400 Butt weld Tee
- Monel Alloy 400 Long Stub End
- Monel 400 LR Elbows
- ASTM B366 Monel 400 Buttweld Fittings
- Monel Alloy 400 Butt weld Nipple
- ANSI B16.5 Monel 400 Pipe Fittings
- Monel Alloy 400 Long Stub End
- ASME SB366 Nickel Alloy 400 Long Radius Bend
- Monel Alloy 400 Two Joint Pipe Fittings
- Monel 400 Industrial Pipe Fittings
- WERKSTOFF NR. 2.4360 Barrel Nipple
- 400 Monel Butt weld Fittings
- Alloy 400 1D Elbow/3D Elbow/5D Elbow
- Monel Alloy 400 Stub End
ASTM B366 Monel Alloy 400 Pipe Fittings Application
