Titanium Gr 5 Socket Weld Fittings
Ti Alloy Gr 5 Socket Weld Pipe Nipple, Titanium Gr 5 Socket Weld Fittings, ASTM B381 Alloy Gr 5 Socket Weld Plug, High Quality Titanium Gr 5 High Pressure Socket Weld Fittings at Best Price in India.
VM Energy Solutions INC is a branded supplier and trader of Titanium Grade 5 Socket Weld Fittings, which is one of the broadly used grades of heat resistant steel furnished into several enterprise sectors. Titanium UNS R56400 Socket Weld Union Fittings has an appreciably better coefficient of thermal growth as non-alloyed steels, in which in reference to a worse thermal conductivity; an extra distortion needs to be expected. It is utilized in Coal Gassifier Components, Flare Tips, Furnace Components, Food Processing Equipment, Bricking Plates, Cement Kiln Components, and more. It gives Oxidation resistance, Resistance to hot corrosion, Moderate strength at excessive temperature, Strength and longevity at cryogenic temperatures. The managed evaluation of this steel allows it to hold enough ductility in situations as much as half of the tough situations to be roll or brake formed into plane, architectural and mainly rail vehicle structural additives.
- Titanium Gr 5 Socket Weld Fittings Standard Specification
- Titanium Gr 5 Socket Weld Fittings Standard
- Titanium Gr 5 Socket Weld Fittings International Standards
- Different Forms of Titanium Gr 5 Socket Weld Fittings
- Titanium Gr 5 Socket Weld Fittings Chemical Composition
- Titanium Gr 5 Socket Weld Fittings Mechanical Properties
- Size Chart Of Titanium Gr 5 Socket Weld Fittings
- Weight Chart Of Titanium Gr 5 Socket Weld Fittings
- Largest Inventory Of Titanium Gr 5 Socket Weld Fittings
- Manufacturing Standard / Pressure Rating of Titanium Gr 5 Socket Weld Fittings
Titanium WNR 3.7165 Socket Weld Plug Fittings machines further due to the fact its chips are stringy and it will work harden rapidly. It is likewise utilized in Flare tips, Fluidized mattress coal combustors, Radiant tubes, Tube hangers for petroleum refining and steam boilers, Coal gasifier inner additives, Thermowells, and more. It is used for production elements which need to be proof against scaling as much as approximately 1050 Degree C and appreciably inured to the impact of sulphurous gases, mainly above 900 Degree C, could be very low. It is regularly applied at cryogenic temperatures, with great longevity to -450 Degree F temperatures, and occasional magnetic permeability.
ASME SB381 Ti Alloy Gr 5 High Pressure Socket Weld Cross, Titanium Gr 5 Socket Weld Fittings, UNS N56400 Socket Weld Half Coupling Supplier, DIN 3.7165 Socket Weld Pipe Cap, Titanium Alloy Grade 5 Socket Weld Union, Grade 5 Titanium Socket Weld 90 deg, Titanium N56400 Socket Weld 180 deg. Elbow in Mumbai, India.
Alloy Ti-6Al-4V Socket Weld Bushing Fittings is stabilized grades for heavy phase welding and excessive temperature applications, alongside excessive temperature resistant grade and excessive resistance to popular corrosion, pitting and pressure corrosion cracking. Combined with its low carbon content material, it's also powerful at resisting embrittlement, due to the fact the steel is usually applied in excessive situations, along with furnace production and heat treating equipment. The more seriously carburizing atmospheres of industrial heat treating furnaces require this steel, due to the fact it's miles broadly utilized in reasonably carburizing atmospheres along with encountered in petrochemical environments.
We Keep Bulk Stock Of UNS N56400 WNRF High Pressure Socket Weld Fittings, Titanium Gr 5 Socket Weld Fittings at Our Stockyard, Check Ti Alloy Grade 5 Socket Weld Pipe Nipple Dimension, Buy ASTM B381 Alloy Gr 5 Socket Weld Full Coupling at an Affordable Price In India.
Titanium Gr 5 Socket Weld Fittings Standard Specification
| Specifications | ASTM B381 / ASME SB381 |
|---|---|
| Size | 1/8" NB to 4" NB in |
| Threaded Fittings Dimensions | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Pressure Rating | 2000lb/ 3000lb/ 6000lbs |
| Thread | NPT, BSPT, BSPP |
| Manufacturing Standards | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 BS : BS3799 EN: EN10253-1, EN10253-2 |
| Connection | Welding |
| Manufacturing process | Push, Press, Forge, Cast, etc. |
| Specialized manufacturer of | 90º Elbows, 45º Elbows, Tees, Crosses, Couplings, Inserts, Caps, Nipples, and Unions, Forged Pipe Fittings, Socket Weld & Threaded, Equal Tees & Reducing Tees, 90° & 45° Elbows – Female-Female, Male-Female, Male-Male, Union, Nipples, Couplings, Plugs Fittings |
| Socket Weld Forged Fittings Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Socket Weld Fittings uses & application | Fittings To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc |
| Material Test Certificates (MTC) for Titanium Gr 5 Socket Weld Fittings as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Titanium Gr 5 Socket Weld Fittings Standard
| ASTM B381 – ASME SB381 Forged Fittings | Standard Specification for Wrought Austenitic SS Piping Fitting |
| ASME B16.9 Forged Fittings | Factory-Made Wrought BW Fittings |
| ASME B16.11 Forged Fittings | Forged Steel Fittings, SW – Welding and NPT |
| MSS SP-43 | Wrought and Fabricated BW Fittings for Hight And Low Pressure |
| BS3799 | Specification for Steel fittings, screwed and SW for the Oil And Gas Industry |
Titanium Gr 5 Socket Weld Fittings International Standards
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr5 | 3.7165 | N56400 |
Different Forms of Titanium Gr 5 Socket Weld Fittings
Titanium Gr 5 Socketweld Union
Titanium Gr 5 Socketweld Tee
Titanium Gr 5 Socketweld Plug
Titanium Gr 5 Socketweld Full Coupling
Titanium Gr 5 Socketweld Elbow
Titanium Gr 5 Socketweld Cross
Titanium Gr 5 Socketweld Coupling
Titanium Gr 5 Socketweld Cap
Titanium Gr 5 Socket Weld Tee
Titanium Gr 5 Socket Weld Fittings Chemical Composition
| Grade | C | Ti | Fe | O | AI | V |
| Titanium Gr5 | - | 90 min | 0.25 max | 0.02 max | 6 min | 4 min |
Titanium Gr 5 Socket Weld Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
Bulk Stock of Titanium Gr 5 Socket Weld Fittings, Rate of ASTM B381 Alloy Gr 5 Socket Weld 180 deg in India, Check online Titanium UNS R50400 Socket Weld Plug Pressure Ratings, Largest DIN 3.7165 High Pressure Socket Weld Fittings Stockist in India, We offer ASME SB381 Ti Alloy Gr 5 High Pressure Socket Weld Pipe Nipple in almost all Sizes.
Size Chart Of Titanium Gr 5 Socket Weld Fittings
| Description | Class Designation | ||
|---|---|---|---|
| 3000LB | 6000LB | 9000LB | |
| Elbows 45 deg and 90 deg, Tee, Crosse, Coupling, Half-Coupling, End or Pipe Cap |
½ - 4 | ½ - 2 | ½ - 2 |
| ½ - 4 | ½ - 2 | ½ - 2 | |
| ½ - 4 | ½ - 2 | ½ - 2 | |
Weight Chart Of Titanium Gr 5 Socket Weld Fittings
| Normal Size Of Pipe | Type A | Type B | QTY | Weight Chart |
|---|---|---|---|---|
| ¼ | 0.81 | 0.88 | 160 | 0.20 |
| ⁄ | 0.97 | 1.00 | 130 | 0.26 |
| ½ | 1.12 | 1.31 | 100 | 0.57 |
| ¾ | 1.31 | 1.5 | 75 | 0.71 |
| 1 | 1.5 | 1.81 | 40 | 1.08 |
| 1 ¼ | 1.75 | 2.19 | 25 | 1.68 |
| 1 ½ | 2.00 | 2.44 | 18 | 2.38 |
| 2 | 2.38 | 2.97 | 10 | 3.55 |
| 2 ½ | 3.00 | 3.62 | 4 | 6.22 |
| 3 | 3.38 | 4.31 | 2 | 10.36 |
| 4 | 4.19 | 5.75 | 1 | 23.91 |
Largest Inventory Of Titanium Gr 5 Socket Weld Fittings
- ASME SB381 Titanium Gr 5 Socket Weld Fittings
- Gr 5 Titanium PN 10 Socket Weld Cross
- Titanium Gr 5 Socket Weld Equal Tee
- ASTM B381 Alloy Gr 5 Socket Weld Fittings
- Titanium Gr 5 Socket Weld Fittings
- Ti Gr 5 Half Coupling
- Titanium Alloy Gr 5 Socket Weld Fittings
- Titanium Gr 5 socket Weld female thread coupling
- Grade 5 Titanium Socket Weld End Pipe Cap
- UNS N56400 Socket Weld Plug
- Ti Gr 5 Monel Socket Weld Full Coupling
- Titanium Gr 5 Half Coupling
- Titanium UNS N56400 Socket Weld Fittings
- Ti Alloy Gr 5 Socket Weld Fittings
- ASME SB381 Ti Alloy Gr 5 High Pressure Socket weld Fittings
- Titanium Alloy Grade 5 Socket Weld Fittings
- Titanium Gr 5 Socket Weld Pipe Elbow
- Ti Alloy Gr 5 Socket Weld 45 deg. Elbow
- ASTM B381 Gr 5 Socket Weld Fittings
- Titanium Gr 5 Socket Weld Fittings
- Titanium Gr 5 Socket Weld Fittings
- ASTM B381 Gr 5 Groove & Tongue Flange
- Titanium Alloy Gr 5 Socket weld Plug
- ASME SB381 Ti Alloy Gr 5 Socket Weld Pipe Nipple
- Titanium Gr 5 150# Union
- Titanium Alloy Grade 5 Socket Weld Fittings
- Gr 5 Titanium Socket Weld Fittings
- Titanium Gr 5 Forged Socket weld Elbow
- WERKSTOFF NR. 3.7165 Socket weld Fittings
- Grade 5 Titanium Socket Weld Forged Elbow
- Ti Gr 5 Socket Weld Pipe Elbow
- Titanium Gr 5 Socket Weld Fittings
- Ti Gr 5 Socket weld Pipe Elbow
- Titanium N56400 Socket Weld Tee
- ANSI B16.5 Titanium Gr 5 Socket Weld Fittings
- Titanium Gr 5 Socket weld Unequal Tee
- ASME SB381 Grade 5 Titanium 180 deg. Socket Weld Elbow
- Titanium UNS N56400 Forged Socket Weld Elbow
- Titanium Gr 5 Socket Weld Fittings
- ASTM B381 Alloy Gr 5 WNRF Socket Weld Pipe Nipple
Manufacturing Standard / Pressure Rating of Titanium Gr 5 Pipe Socket Weld Fittings
| Pressure-Temperature for ASME B16.11 Threaded Fittings (psig) | |||||
|---|---|---|---|---|---|
| Temperature | Class | ||||
| Class 150 | Class 300 | ||||
| 1/4 - 1 inch | 1 1/4 - 2 inch | 2 1/2 - 3 inch | |||
| (oF) | (oC) | ||||
| -20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
| 200 | 93 | 265 | 1785 | 1350 | 910 |
| 250 | 121 | 225 | 1575 | 1200 | 825 |
| 300 | 149 | 185 | 1360 | 1050 | 735 |
| 350 | 177 | 150 | 1150 | 900 | 650 |
| 400 | 204 | - | 935 | 750 | 560 |
| 450 | 232 | - | 725 | 600 | 475 |
| 500 | 260 | - | 510 | 450 | 385 |
| 550 | 288 | - | 300 | 300 | 300 |
ASTM B381 Titanium Gr 5 Socket Weld Fittings Application
